Fixing Instructions - easy installation of roof and glazing panels!
Click 16 polycarbonate roofing and glazing panels are easily installed by non specialists in 6 easy steps as described below or click here for our illustrated installation guide.
Important Note: EEZEEROOF roofing Panels are designed to be installed with the flutes of the panels running down the path - not across |
|
| 1 | Cut the roof panel to the required length and seal the open edges of the panel with aluminium tape, do this to each panel. |
| 2 | Attach the aluminium 'f' trim to one end of the roof timbers and slide the first roof panel into the 'f' trim channel. Seal with Neutral Cure Silicone |
| 3 | Fix the roof panel on to each timber support with a stainless steel screw. |
| 4 | Click the next roof panel down into place on the fixed panel, ensuring that it has clicked in along the whole length and fix as '3'. Continue the process to the end of the roof. TIP: Prior to fixing, the roofing sheet will slide freely along the 'Click Strip' if clicked correctly. |
| 5 | Cut the last panel to size (if necessary) and slide the 'F' trim over the cut edge. Attache the 'F' trim to the roof timbers and seal with Neutral Cure Silicone |
| 6 | Finally apply the Closure Trim over the front edge of the roof installation |
 NOTE: The distance between roof supports should not exceed 1 metre (or 800mm where heavy snowfall is regularly experienced. |
Installing eeZeeRoof Click 16 polycarbonate sheeting as roof panels or glazing panels can be done easily and no specialst knowledge or specialist tools are needed. However, if you do have any queries on how to install click 16 polycarbonate sheets please give us a ring on 01267 234321 or contact us using or enquiry form on the contacts page!
West Wales Building Plastic Supplies
Units 1-3, Gelli Gaeros Trading Estate, Cwmffrwd, Carmarthen, SA32 3DJ, Tel: 01267 234321 Fax: 01267 235723
Units 1-3, Gelli Gaeros Trading Estate, Cwmffrwd, Carmarthen, SA32 3DJ, Tel: 01267 234321 Fax: 01267 235723